M Design Luna Diamond 1000CL, Инструкция по установке и эксплуатации

Страница: 10 / 44

10
C
Instructions for installation and use DIAMOND Gas DH-CL-CR-DC
Picture 1: ROOF EXIT (C31)
Picture 1
4. Installing the chimney
Install the concentric flue duct as indicated by ONTOP - METALOTERM. The only authorised pipes are
ONTOP Metaloterm™. ONTOP-METALOTERM tested our appliances with their conduct and we only
guarantee a good working of the appliance with those. Between the external wall of the pipe and the wall
or the ceiling, you should allow for a clearance of at least 50mm and protection that is suitable against
temperatures of around 130°C. The passage of the front panel cowl in the external wall must be filled in
using silicone mastic.
Position air inlet : see page 13
This is recommended with a roof exit ≥ 3m
This is recommanded with a roof exit ≤ 3 m
Ø 150/100 Ø 150/100
Aplliance C (min) C (max) Restriction (as from 4m)
1000 DH / CL / CR / DC 3 m 17m Ø60 (as from 2m : Ø75)
1150 DH 3 m 17m Ø 60
1300 DH / CL / CR / DC 3 m 17m Ø 60
1600 DH / CL / CR / DC 3 m 20m Ø 75
1900 DH 3 m 20m Ø 75
Ø 200/130 Ø 200/130
Appliance C (min) C (max) Position air inlet (as from 3m)
1000 DH / CL / CR / DC 2 m 9m Ø 60 (as from 2m : Ø 75)
1150 DH 2 m 9m Ø 53 (as from 2m : Ø 75)
1300 DH / CL / CR / DC 2 m 9m Ø 60 (as from 2m : Ø 75)
1600 DH / CL / CR / DC 2 m 9m Ø 60 (as from 2m : Ø 75)
1900 DH 2 m 9m Ø 60 (as from 2m : Ø 75)