M Design ACP-09CH25AEMI/I, Руководство по обслуживанию

Страница: 16 / 89

Function Display
Temperature Set temperature value
Temperature
(fan and Drying
mode)
Room temperature
Activation of Timer
ON, Fresh, Swing,
Turbo, or Silent
(3s)
Cancellation of
Timer OFF,
Fresh, Swing,
Turbo, or Silent
(3s)
Defrost
Warming in heating
mode
Self-clean (available
on select units only)
Heating in room
tempurature
under 8°C
P
ro
d
u
ct
F
ea
tu
re
s
1.3 Display Function
Unit display functions
1.4 Fan Mode
When fan mode is activated:
• The outdoor fan and compressor are stopped.
• Temperature control is disabled and no temperature
setting is displayed.
• The indoor fan speed can be set to high, med, low, or
auto.
• The louver operations are identical to those in cooling
mode.
• Auto fan: In fan-only mode, AC operates the same as
auto fan in cooling mode with the temperature set at
24°C.
1.5 Cooling Mode
1.5.1 Compressor Control
∆ T is the programmed parameter of temperature
compensation.
• When T1-Ts < ∆ T-2 ℃ , the compressor ceases
operation.
• When T1-Ts > ∆ T-0.5 ℃ , the compressor continues
operation.
• When the AC is operating in mute mode, the
compressor operates at a low frequency.
• When the current exceeds the preset value, the current
protection function activates and the compressor
ceases operation.
1.5.2 Indoor Fan Control
• In cooling mode, the indoor fan operates continuously.
The fan speed can be set to high, medium, low, or auto.
• If the compressor ceases operations when the
configured temperature is reached, the indoor fan motor
operates at the minimum or configured speed.
1.5.3 Outdoor Fan Control
• For ACP-18CH50AEMI/I & MSAFDU-
24HRFN1-QRD0GW, The outdoor unit will be run at
different fan speed according to T4.
• For ACP-09CH25AEMI/I, MSAFBU-
12HRDN1-QRD0GW and MSAFCU-18HRFN1-
QRD0GW(S1) , The outdoor unit will be run at
different fan speed according to T4 and compressor
frequency.
• For different outdoor units, the fan speeds are
different.
1.5.4 Condenser Temperature Protection
 Page 11  