M-Audio StudioPro 4, Руководство пользователя

Страница: 9 / 65

8
Rear Panel
This rear panel image shows the powered Left Speaker. The Right Speaker is passive and
has only one Speaker terminal for connection to the Speaker Terminal of the Left Speaker.
1. RCA Line Inputs (L & R): These jacks accept standard RCA input connections with
unbalanced wiring. The included 1/8-inch mini-jack—to—RCA audio cable allows
users to connect the StudioPro 4s to other equipment accepting 1/8-inch mini jack
connections, such as a laptop or MP3 player.
There are 2 RCA Line Inputs:
L — Left Channel Input (White)
R — Right Channel Input (Red)
2. Mid-Boost: Two selections are available for the Mid-Boost, “In” and “Out.” The Out
setting produces a flat frequency response curve, while the In setting gives an
added boost in the mid-range frequencies.
3. Speaker Outputs: There is one spring action Speaker terminal Output for
connecting the Left Speaker to the Right Speaker using the included speaker wire.
4. Power Receptacle: Accepts a detachable 2-circuit line cord in order to power the
StudioPro 4 system.
5. Product Label: This label contains the model and serial number information.
6. Power Switch: This switch turns the StudioPro 4 system on and off. The on position
is indicated by the white dot on the switch.
7. Sub-Frequency Port: This port aids in the reproduction of very low frequencies by
discharging frequencies below 70Hz.
E
N
G
L
I
S
H