background image

  

29 

 

Features

 

 

Top Panel 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

Headphone/Main Level Control

 

 

1.

 

Main Control: 

This 360° knob will adjust either the currently selected voice effect’s parameters, or the 

Headphone/Main speakers level.  

 
 

 
 
 

Mic 

 

2.

 

Mic Level Fader:

 This fader controls the mic volume being sent to the 

USB ports

Headphone

and 

Main Outs

. This is not a “gain” control. When fully lowered, it lowers the mic to its lowest 

level. 

3.

 

 “

SPEAKERS” LED Indicator:

 This RGB LED will light up to show that the 

Main Control

 knob 

is currently controlling the output level of the 

HP Out

 and 

Main Out

.  

4.

 

FX Parameter Button:

 Press this button to switch the 

Main Control

 knob from controlling the 

currently selected effect’s parameter and the volume level for the 1/8” 

HP Out

 and 1/8” 

Main 

Out

. This button will light up to show that the 

Main Control 

knob is currently controlling the 

selected effect’s parameter. This button is backlit by an RGB LED. 

5.

 

 

All Streams Mic Mute LED: 

Illuminates when the mic audio signal has been muted to all 

streams. 

 

6.

 

This RGB backlit button can be configured to mute the mic audio signal being sent to all audio streams, the chat 

stream, or the broadcast stream. This button can have a unique audio sample assigned to it so that when this button is 
pressed it will not only mute the incoming mic signal, but also trigger a funny audio clip or beep sound. Use the          
M-Game software to configure the sample assignment and adjust the LED behavior of this button. See the 

Sample 

Control

 section for more details.

 

7.

 

 

Configurable Mic Mute Button: 

This RGB backlit button can be configured to mute the mic audio signal being sent 

to all audio streams, the chat audio stream, the broadcast audio stream or any other stream the mic is able to be sent 
to. Use the M-Game software to configure the mute assignment, and adjust the LED behavior of this button. See the 

Microphone Settings

 section for more details. 

When this button is double pressed rapidly, it will activate the 

MIC MUTE ALL

 selection and activate the 

MUTE ALL 

MIC

 

LED

 icon. This will mute the mic going to all streams (Chat and Stream). 

 

1

1

2

3

4

6

7

8

9

5

FX

PARAM

2

3

4

6

7

5

FX

PARAM

Содержание M-Game RGB Dual






































Отзывы: