Your setup should look like this:
NOTE: If you are using your Delta 1010 solely for optical transfers
and do not need A/D or D/A capability, it is not necessary to
connect the Delta 1010 rack mount unit. However,
synchronization via MTC may be desired, and your Delta system
will lose its MIDI function without the rack unit (see section,
“Synchronizing Your ADATs”).
Hooking Up Your ADAT Optical Device
TOSLink is the name of the standard for optical cables, plugs, and jacks. Using
two good quality TOSLink optical cables:
1. Plug one end of an optical cable into the TOSLink optical output jack of
your ADAT (or other 8-channel ADAT optical capable device).
2. Plug the other end of your optical cable into the ADAT Optical “In” jack of
the
Delta 1010-AI
.
3. Plug one end of the second optical cable into the ADAT Optical “Out” jack
of the
Delta 1010-AI
.
Delta 1010
DEL
TA 10
10-A
I
TM
E
na
bl
e
d
E
na
bl
e
d
A
DAT
t
oHost
E
na
bl
e
d
A
D
AT
to
An
alog
Outs
A
na
log
Ins
ToA
DAT
E
na
bl
e
d
A
DAT
T
hru
Po
we
r
ad
at In
te
rfa
ce
M
od
ul
e
fo
r D
elt
a 1
01
0
Delta
1010-AI
5
