M/A-Com Orion, Руководство по установке

Страница: 40 / 80

Cassette Mounting (EURO Only)
The cassette mounting assembly is designed to mount in a standard DIN space
in the instrument panel or console. This mounting permits rapid insertion and
removal of the radio unit from the vehicle. All connections are made through
a quick disconnect connector at the rear of the cassette mounting assembly to
the radio unit. This connector is part of the cassette assembly. The cassette
assembly is shown in Figure 36.
Figure 36: Cassette Assembly (EURO Only)
Cassette Assembly Mounting
1. Insert the cassette assembly in the mounting location. Secure the cables
with the sheet metal screws and retaining straps provided.
2. Secure the back of the cassette assembly using the mounting stud (located
at the back of the cassette assembly), No. 6 flat washer, No. 6 split lock
washer and No. 6 wing nut.
3. Several tabs are located on the top, bottom and sides of the cassette
assembly. These tabs are conveniently located near the front of the
assembly and can be bent out as needed to further secure the cassette
assembly to the vehicle.
4. Next, install the handle assembly:
a. Turn the radio upside down. Remove the two small machine screws
on the bottom of the radio, near the front. Use upward pressure on
screws to engage captivated threads for removal.
40