MM-010539-001, Rev. P6G
51
10 TROUBLESHOOTING AND SERVICING
10.1 TROUBLESHOOTING
If a unit is suspected to be faulty or need service and repair, perform the following checks:
1.
Visually inspect the installation for obvious defects such as worn, weathered or frayed cabling.
2.
Verify that the unit is receiving sufficient voltage and current to the power input connector.
3.
Use the Serial RSSI Test Box and verify signal quality from the Base Station.
4.
Replace any defective antenna or power source components as required, and return any inoperable
Clients to the manufacturer for repairs.
10.2 TUNING AND ALIGNMENT
Every VIDA Broadband Client is fully aligned, including TX Frequency and RF Power Output, before
shipment to ensure compliance with various regulatory requirements and product performance.
No further tuning or alignment is required by the customer or installer during the installation process.
Basic control of the Client, including RF power output and channel assignment, is accomplished by the
UAS during site configuration.
The Client is not a field repairable unit. If a unit is suspected to need servicing or re-alignment, then the
unit should be removed from service and returned to M/A-COM for repairs. Periodic checks of frequency
and modulation bandwidth should be performed during routine preventative maintenance checks.
