LZR FLATSCAN SW, Руководство пользователя

Страница: 5 / 16

75.5947.04 LZR-FLATSCAN SW 20200612 Page 5 of 16 75.5947.04 LZR-FLATSCAN SW 20200612 Page 5 of 16
1
8
10
7
9
12 11
«click»
14 13
Drill a 5 ⁄
16
" pass-thru hole in the mounting base
and door. Sand down any rough edges.
Pass the primary/secondary cable through the
hole and then position the cable in the notch of
the mounting base and secure.
Remove the sensor cover by inserting your finger
and then pull firmly towards you.
Pass the cable through the hole on the back of
the sensor and secure the sensor to the mounting
base by sliding it downward.
Connect the black plug to the black connector. Ensure all wires are secured within the notch to
avoid damage from the cover.
Use a plug to close the secondary sensor. Secure the lock screw to avoid vibrations during
door movement.
If installing only one sensor (low-energy, approach side), skip steps 7, 8, 10, 11, 12, and 13.
MOUNTING (cont.)