Page 4 of 16
75.5947.04 LZR-FLATSCAN SW 20200612
Page 4 of 16
75.5947.04 LZR-FLATSCAN SW 20200612
1
1
2
3
5
4
6
Slide the mounting base off of the sensor.
Position the mounting base on the door. Use the
positioning tabs to align the base correctly.
Mark the pilot holes on the door. You can also
use the inner surface of the mounting base to
fasten the screws.
Using a wire cutter, remove the positioning tabs
from the mounting base.
Fasten the 3 screws using a screwdriver.
Drill pilot holes
1
⁄
8
" for sensor mounting.
For applications requiring a spacer, first mount spacer to door, and then mount mounting base to spacer.
When mounting the mounting base, ensure the sensor will not interfere with door movement.
If the sensor isn’t correctly positioned, it could be damaged during door opening/closing.
Full-energy applications require a sensor on each side of the door in order to comply with ANSI 156.10.
Low-energy applications may use only one sensor on the approach side.
MOUNTING
