ENGLISH
The SAMOURAÏ 200 are especially conceived for an utilization on stage, in disco. it produces a green laser that displays 2 logos in the same
time (angle, rotation and displacement separately ajustable ) either to the rhythm of music (by a built-in microphone) or either while using a DMX
keyboard.
DESCRIPTION :
1. LASER
OUTPUT
This hole is the laser output. Please, don’t obstruct this hole or the drawing will not be displayed.
2. DMX
PANEL
These 4 buttons permit you to modify the DMX address corresponding to the channels PAN and TILT. It permit also to do one test of
rotation PAN and TILT and to do a reset.
The DIP control the DMX address of the device and the DMX panel permits to choose the DMX addresses of the channels PAN & TILT. If
you bring in two different addresses (for example address DIP =2 and address DMX panel = 1), some channels won't normally function. It is
for that we prefer counsel you to use the same addresses for the DIP and the DMX panel. For example, if you bring in the address DMX DIP
= 42, it is preferable to bring in the address DMX panel = 42
FUNC :
Push on this key one or several times to enter in the menu of the SAMOURAI 200.
One press: the display of DMX address flashes (use the UP / DOWN keys to select the DMX address)
Two press: The display indicates you PAN (horizontal rotation). Push on ENTER key to make a rotation PAN
Three press: The display indicates you TILT (vertical rotation). Push on ENTER key to make a Tilt rotation
Four press: : The display indicates you Colo (color)
Five press : The display indicates you Reset. Push on ENTER key to do a movement of motors to it original place
Note: The internal software is the same for several items. It is for you have access to the Colo mode but this function don't working.
UP / DOWN :
Use these keys to modify the value of the DMX address
ENTER
:
Push on this key to validate a value
