ENGLISH
The laser device ARTEMIS 3 is especially suitable for applications on stage and in night club. It create a three colors from two green laser beam
which display drawings either to the rhythm of the music (an integrated microphone ) or either in DMX mode ( controled by a DMX keyboard ). In
option, it possible to control the light device with a personnal computer.
DESCRIPTION :
1. LASER
OUTPUT
This hole is the laser output. Please, don’t obstruct this hole or the drawing will not be displayed.
2. CONTROL
PANEL
This panel is composed of a display and three buttons (ADDR -, ADDR+ and MENU). It permits you to select the operating mode of the
ARTEMIS 3 (either in music mode, either in DMX mode)
MODE :
-
The music mode allows the ARTEMIS 3 to execute a internal sequence that it will execute according to the rhythm of music
-
The DMX mode permits to control one or several ARTEMIS 3 at the same time from only one DMX keyboard
OPERATING MODE SELECTION :
-
Push on the MENU button until are displayed C 1. Then, use the ADDR+ an ADDR- buttons to choose the operating mode.
-
When AUTO is displayed, it means that you are in music mode ( the device will display logos according to the rhythm of music )
-
If the display indicates 512 with a flashing point, it means that you are in DMX mode ( the device is controled by a DMX keyboard )
-
In DMX mode, you can change the DMX address of the ARTEMIS 3. To do it, when C 1 is displayed (with the flashing point ), use the
ADDR- & ADDR+ buttons for increase or decrease addresses DMX
-
Once the DMX address selected, you must wait for some seconds (perhaps one minute) that shows A X ( X is the selected adress ). It
means that the DMX address is saved in memory. The device will keep this DMX address then even though you switch the
ARTEMIS 3 off
3. SUPPORT OF INSTALATION
Use to fix the device on a stand for light radiating units or horizontal bar
