6. Maintenance of suction and pumping
devices
IMPORTANT!
Suction and pumping device after the finished work, one
should carefully wash in order to remove residual honey,
bearing in mind the protection of electrical components.
Directly after work with the device,
we put suction conduit
into a container with hot water and we are pumping 40l of
heated water, to rinse the module of suction and pumping
device.
We pump and we pour out water, this operation can be
repeated several times. To cleaning/washing of suction and
pumping device, one should prepare approximately 40 l of
water heated to a temperature from 50
°C
to 60
°C.
This
process is necessary and protects the device from damage,
which can cause crystallised honey (ie.
disruption/tearing of
the seal and leakage of honey). In the case of improper
maintenance, will occur disruption/tearing of sealant on the
shaft of the pumping module. Damage resulting from
improper cleaning module is not covered by warranty.
8. Storage
After the completion of the work,
the pump
must be thoroughly
cleaned and dried
.
Before each new season, one should make an additional
technical review, and in the event of fault detection, please
contact the service centre.
The device should not be enabled, if the ambient
temperature is lower than 5
º C. Before starting the device,
in the case when it has been moved from the room with the
lower temperature to spaces of higher temperature, you
should wait until it reaches the ambient temperature.
9. Disposal
The worn out product shall be subject to disposal as waste
only in the selective collection of waste organised by Network
of Municipal Collection points for Waste Electrical and
Electronic Equipment. The consumer shall have the right to
return used equipment in the electrical equipment distributor
network, at least, free of charge and directly if a device that
is returned is the proper kind and provides the same
functionality as the newly purchased equipment.
10. Warranty
Products purchased in the ”
Łysoń
” company are covered by
manufacturer's warranty.
The warranty period is 24 months.
On purchased products shall be issued a receipt or VAT
invoice.
Warranty details are available on the website -
www.lyson.com.pl