2.3 Procedure
1. Secure the rear bezel metalwork to the wall or
panel in the chosen loca� on, ensuring an opening
matching the cut-out area on the bezel is available for
cable access.
2. Make the wiring connec� ons to the tablet
display. (DC jack plug for power, and OTG cable
for connec� on to the ethernet adapter if a wired
connec� on is required).
3. Place the tablet into the bezel frame. It should be held in
place by the foam on the side of the bezel and sit directly in
the bo� om.
4. Posi� on the top cover, sliding from le� to right to engage
the lugs, and fasten in place with the tamperproof screws.
2.4 Tamper Screw Detail
PLEASE NOTE:
A T25 Tamper Proof Driver will
be required to secure the bezel
cover together.
4