Lynxmotion HQuad500, Инструкция по сборке

Страница: 7 / 16

Lynxmotion UAV HQuad500 Frame Assembly Guide
2.3 - Center Plates Sub-Assembly
The clamps are asymmetric and they need to be installed correctly on the top & bottom plates. Mostly to be sure the
top & bottom will work together but also help with the Camera Plate mounting up front. To help with this process we
named the sides of the clamps A and B.
Lynxmotion UAV ­ HQuad500 ­ Clamps Sides
Material Needed:
● 16x ­ 16mm Aluminum Clamp Half
● 70x ­ 4­40 x ¼” Hex screws
● 1x ­ HQuad500 Top Plate
● 1x ­ HQuad500 Bottom Plate
● 6x ­ 4­40 x 3/16” x 1” Aluminum Standoff
1. Mount each Half Clamp on the frame keeping the right location of the A and B sides using two 4­40 x ¼”
Hex screws. Those two views are from the Inside of the frame and where the clamps should sit. This is also
important as the mounting pattern for the Quadrino Nano features a cutout to allow advanced wiring and
needs to match.
Lynxmotion UAV ­ HQuad500 ­ Center Plates Clamps Location
Lynxmotion UAV P.7