Lynxmotion UAV
HQuad500 Frame Assembly Guide
2.
Now you can add the Side Plates to each of the four locations shown below. They insert easily in the slots of
the bottom plate.
Lynxmotion UAV HQuad500 Center Assembly Side Plates
3.
Install the top center plate subassembly on top of the bottom assembly and use 440 x ¾” Hex screws to
secure the two halves loosely from top and bottom. You will want to tighten the bottom ones slightly more
and finish the tension with the top once it lays flat on the table. Remember to keep spacing roughly equal on
both clamp sides.
Lynxmotion UAV HQuad500 Center Assembly Mating
Lynxmotion UAV
P.11