|
SEDONA BY LYNX™ VENT HOOD CARE & USE/INSTALLATION
4
Exterior Dimensions
Width D Height E
Depth F
36”
24”
32”
42”
24”
32”
48”
24”
32”
EXTERIOR DIMENSIONS
INSTALLATION PREPARATION
The Sedona by Lynx ™ vent hoods are designed for outdoor use. It is recommended that the vent hood be installed by a
qualified technician in accordance with all local building codes.
Before beginning installation, please thoroughly read and become familiar with these instructions. Installation and
service must be completed by a qualified installer. Failure to properly install this product may void the warranty.
Please be advised that the Sedona by Lynx™ Vent Hood MAY NOT be installed on a Patio or Lanai area that does not
have a roof over the Grill Hood to protect it from direct rain or potential water ingress. This Hood should be installed
with a MINIMUM of three (3) feet of weather proof roof coverage on all sides that are not protected from direct rain by
an adjacent wall.
It is required that all duct work and roof openings be thoroughly sealed with the applicable tape and/or roof sealant to
prevent ingress of water.
Exterior Dimensions
INSTALLER
: Read these instructions carefully before starting installation. Please leave these instructions with
the homeowner.
HOMEOWNER
: Please retain these instructions for future use
15”
10”
2 1/2”
2 1/2”
3/4”
24”
32”
36”, 42”, 48”
8”
D
E
F
35320 Sedona Vent Hood Care and Use 2017.indd 4
2/16/2018 4:00:18 PM
