P VD 5600 Reference Manual. Rev 2.0
Page 18 of 34
Settings and Control
The P VD 5600 module has an integrated micro-controller, which enables the module to
be configured and controlled locally using the multifunction switch and 4 character dot
matrix display, or from remote using a GUI interface when using one of the optional
controllers and control software.
NOTE.
This module is extremely compact and flexible with hundreds of possible
user settings. It is not practical to make all these settings available on the local
dot matrix display. The use of the control system is mandatory to access the
vast array of settings possible. Please refer to the GUI section of this manual for
details on the control provided. Some basic module settings are possible via the
local controls, which are detailed below.
Once set, all settings are automatically saved in non-volatile internal memory. (Flash
RAM) The module will always recall the last used settings.
Multi Function Switch
The CardModule is equipped with a multi-function switch located on the front bottom
edge of the card. (See above)
Using the Local Display Menus
Making local adjustments to the module is done using the multifunction switch and the
integrated 4-character dot matrix display. The menu system is layered, and navigation
through the system is done using the
UP
and
DOWN
functions of the switch.
ENTER
is
used to move between menu levels and also enter a selection.
Up
Down
Enter
Switch Operations
Multi-function Switch
Side
Front
Switch Function
Operation
UP
Move UP within a level
DOWN
Move down within a level
ENTER
Change levels / Make selection
!
