- 9 -
Front panel
Fig 1: TDA 2200 front panel.
Controls
The buttons/controls on the front panel of the TDA 2200 can all be used either with direct
presses on the front or by operating the similar keys on the included remote control. All
keys on the front except from the Mains switch (1) can be found on the remote control as
well.
Mains switch (1)
Powers the TDA 2200 on/off. Standby mode is selected with the remote control only.
Mute (2)
Toggles Mute mode on/off. The Volume level indicator will change to “---“ when the outputs
are muted. If the volume control is changed while muted the present volume control setting
will be shown before reverting to “---“ but the outputs remain muted.
Analog Input selector (3)
Changes to Analog input, or if already selected, cycles to the next Analog input.
Digital Input selector (4)
Changes to Digital input, or if already selected, cycles to the next Digital input.