- 12 -
Rear panel
Fig 2: TDA 2200 rear panel.
DIGITAL INPUT 1-3 (1)
RCA Connectors for SPDIF input
DIGITAL OUTPUT (2)
Bypassed selected Digital input. Selected digital input is bypassed at same samplerate to
the Digital Output connector for daisy-chaining more than one TDA-2200. This output is
not active when the Analog input is selected.
DIGITAL INPUT 4 (3)
XLR Connector for AES input
OPTICAL DIGITAL INPUT 5 (4)
Toslink Connector for AES input
ANALOG OUTPUT (5)
DAC output from DSP Section
The connectors from 6-10 are optional if the AD-Converter card is purchased
INPUT (6-8)
Single Ended Analog input L/R pairs 1-3
INPUT (9-10)
Balanced Analog input L/R number 4
LOUDSPEAKER TERMINALS (11)
Loudspeaker output, NOTE! All Outputs are bridged and must not be connected to ground
because of the DC offset to Chassis
TRIGGER IN/OUT (12)