• 7 •
a. When the heater is needed, press TEMP button to select one of the 5
preset temperatures. Press TC button,
flashes, indicating the heater
is turned on. LED Actual displays actual water temperature. When the
water reaches the set temperature,
dims, indicating the heater is
turned off.
To ensure safety, the unit is designed with dual protection. The heater will
be turned off automatically if it has been running for 50 minutes.
b. To speed up the mixing and to use less solution, use De-gas function.
Press TIME button to set the timer for 10 minutes, then press FUNC-
TION button,
illuminates. Press On/Off to start de-gassing. It
changes over to normal cleaning after 2 minutes.
c. When debris “smoke” is no longer visible, cleaning is done. If additional
cleaning is needed, reset the timer and repeat the previous steps.
4. When cleaning is completed, unplug the power cord, open the lid and
remove the basket. Connect the supplied drainage hose to the drain
nozzle by pushing straight on. Open the drainage valve to drain the
dirty water. Clean and wipe the tank dry. Close the drainage valve.
Remove drainage hose and rinse with clean water.
CLEANING SOLUTIONS
It is important to use the proper cleaning solutions for the material being
cleaned. Lyman offers several different ultra-sonic cleaning solutions for
your specific cleaning needs. Always follow the directions on the label of
the cleaning solution for best results.
TURBO® SONIC CONCENTRATED
CARTRIDGE CASE
CLEANING SOLUTION
Scientifically formulated to clean brass cases, will
remove tarnish, oxidation, and carbon buildup better
than competitive formulas. Designed for use in Lyman
Turbo Sonic cleaners and other ultrasonic cleaners.
Cleans brass inside and out, including primer pockets.
• Can be used to clean brass, copper, bronze and
stainless steel
• May be used for removal of light rust from steel
parts, but parts must be inhibited after cleaning
• Not recommended for use on aluminum or steel
(other than for removal of light rust)
