• 10 •
• Will provide limited corrosion protection - after cleaning, do not rinse
the part(s). The part(s) should be properly drained and allowed to air
dry. Not meant as a long term inhibitor - part(s) should be oiled for long
term corrosion protection.
• After making a new cleaning solution, preheat your cleaning solution
mix and run the De-gas feature on the unit for a minimum of 2 min-
utes. Dissolved gas in the solution can diminish the ultrasonic energy.
Once de-gassed, it is not necessary to de-gas again until the solution
is changed.
• Discard the solution when it becomes highly discolored or murky.
Rinse the unit with clean water before recharging.
• Do not mix with other cleaners or chemicals.
For step-by-step instructional videos on using the
Lyman Turbo
®
Sonic Ultrasonic Cleaner
Visit our website at:
www.lymanproducts.com
