*
LY
*
Home Music System
7
Play” mode is to play the presently selected song only; “Single Repeat” mode is to play the presently
selected song repeatedly.
The setting method is: turn the jog dial to move the cursor to the box behind the “Mode”, press the jog
dial. When a icon appears, turn the jog dial to select, confirm and exit after selection.
3.2 Time Display
As shown in Fig. 4-1, the first “00:00” represents the time progress of the presently played song, the
following “00:00” represents the total time of the presently played song.
3.3 Song Selection
As shown in Fig. 3-1, move the cursor to “ / ” box, press the jog dial and turn it to select. The
digits of the first box represents the directory, (for example, if “03” is selected, the 3
rd
directory in the
USB flash disk is selected), and the digits of the following box represents the song No. in the directory,
and the name of the song is displayed behind the box. While selecting a song, please pay attention to
the indication at the bottom of the screen, where “No USB flash disk, please insert a USB flash disk.”
represents that no USB flash disk is inserted into the USB interface or the inserted USB flash disk
can’t be identified, and where “USB flash disk has been inserted, please wait…” represents that a USB
flash disk has been inserted and can be accessed to; When there is no song in the USB flash disk, “No
song in the directory, please select another directory.” is indicated when the directory is selected, and
then it will to another directory and display the name of song in the directory automatically.
Exit the MP3 setting interface by pressing other function key after setting.
You can select a song by “
” and “
” keys on panel while manual MP3 control, use “
”
key to play or pause, and use remote control pad and infrared remote controller to operate. For details,
please refer to the User’s Manual and key function description.
4. Manual Operation Instructions for Tuner
Press “TUNER” key on the panel to access tot eh tuner setting interface (as shown in Fig. 4-1), where
the wave band, radio station channel, sound channel, etc. of the tuner can be set.
4.1 Band Selection
Selection between AM and FM can be switched by pressing the “BAND” below the display screen on
the panel. And can be switched by pressing AM/FM key on remote control pad and infrared remote
controller. The frequency scope of AM band is 522KHz-1620KHz; and the one of FM band is
87.00MHz-108.00MHz.
4.2 Radio Station Search
Press the “
” and “
” keys below the display screen on the panel to search the next or the
previous radio station No. as to call the stored radio station. You can also use the jog dial to search
radio station. Turn the jog dial clockwise and the frequency is increased, namely, the system searches
towards the high frequency band continuously. In case a radio station is found, a black indication bar
as shown in Fig. 4-1 is displayed behind the “Signal”. The indication bar will be widened when the
signal gets stronger; and be narrowed when the signal gets weaker. Turn the jog dial for a circle
quickly, the system will access to automatic search state. In case a radio station channel or the highest
Mode
MP3 player
03
\
0 1
One thousand and one nights
(Fig. 3-1)
Play All
00
：
00 00
：
00
(Fig. 4-1)
BAND FM
100.45
100.45
100.45
100.45
MHz
Signal
MONO
AM/FM tuner
MEMO 40
03
01
