*
LY
*
Home Music System
13
※
※
※
※
Wiring Method for Remote Control Pad
The console should be connected to the remote control pad through twisted pair, and the wiring
method is as shown in figure below.
Tips: The operation description of the remote control pad can be referred to the User's Manual of
HS30R (remote control pad).
※
※
※
※
Description for File Format Applications of USB Flash Disk
1.
The system supports the USB interfaces of USB flash disks, mobile hard disks and USB card
readers (referred to as USB memory), and only supports music files in MP3 format up to
320KBPS, so that the music files in other formats can’t be played. In case a song can’t be
played, check whether the file is suitable.
2.
Supports file system, such as FAT12, FAT16 and FAT32.
3.
For improving the operation speed and optimizing the management, it is recommended that you
should only store MP3 songs in the USB flash disk or mobile hard disk without files in other
formats, and delete any irrelative directory and file as to improve the read/write speed and
speed for editing a timing point.
4.
Maximum 99 primary directories can be established in the root directory, maximum 99 songs
can be stored in each directory, and maximum 99 songs can be stored in the root directory. Do
not add a secondary directory with songs in a primary directory; otherwise, the song in the
subdirectory can’t be read. You can store a song in your USB flash disk by the 3 following
methods:
Establish no directory, and store all songs in the root directory as to select a song conveniently.
But, only 99 songs can be stored. Be careful to select the song in root directory. For selecting
the directory, select directory 00.
Connect to the
remote control
pad interface on
the console
Connect to the
P3 socket of
remote control
pad
The connectors of the two ends
should be one to one
