*
LY
*
Home Music System
10
Note: “…” in band selection represents the default setting, “Stop” represents that the TUNER
program will be stopped when the timing point is reached.
Both AM band and FM band have 40 selections in channel selection, and their numbers represent the
memory Nos. of the radio station channels. When operating the TUNER manually, the received
frequency of the radio station is stored in the memory No. Timer setting operation is just to call the
radio station frequency stored while manual operation.
And click “Yes” to confirm and exit after setting.
5.1.9 Zone Setting:
Turn the jog dial to move the cursor to “Zone Setting”, and press the jog dial to access to the zone
timer setting interface (as shown in Fig. 5-1-5), where a zone can be selected and the volume, program
and ring of the zone can be set.
Zone selection Turn the jog dial to move the cursor to the digit box behind “Zone”, press the jog
again when a icon appears behind the box, turn the jog dial to select, and press the jog dial again
to confirm and exit.
Volume adjustment Operations of the item can be referred to the description of “Volume adjust” of
zone control in page 5.
Program selection Assign a sound source for a zone according to the above-mentioned operation
method for selecting a zone. “…” represents the default setting, “Off” represents that the zone will be
off when the timing point is reached. This operation is to select sound source for the present zone. 6
sound sources are provided for the system, and each zone can use one kind of sound source
simultaneously and also use different sound source. In case MP3 and TUNER sound sources are
selected, the zone will be in mute state when the setting operations described in 5.1.7 and 5.1.8 of page
8 hasn’t been done to the MP3 and TUNER, and the timing point is reached; when MP3 or TUNER is
playing a program before the timing point is reached and nothing is set to the MP3 or TUNER by the
timing point, MP3 and TUNER will not stop playing the program.
Ring setting This operation is to set the On/Off state of the ring for a timing point. Turn the jog dial
to move the cursor to the box behind the “Ring”, turn the jog dial to select, and press the jog dial once
to confirm and exit after selection.
Default Press the jog dial once to the default setting, and the present state is the same as the last
state executed.
Click “Yes” to confirm the operation above after setting, and exit from the zone timer setting interface
to the timer setting interface.
5.1.10 Deleting:
This operation is to delete a present timing point.
5.1.11 Deleting all: This operation is to delete all timing points of the selected day (such as Wednesday).
5.2 Time Adjustment
Turn the jog dial in “Operation Selection” interface to move the cursor to “Adjust Time”, press the jog
dial to access to the operation interface for adjusting time (as shown in Fig. 5-2), turn the jog dial to
move the cursor to the desired time digit item, and press the jog dial once when the digit is displayed
reversely. When a icon appears, turn the jog dial to change the digit, and press the jog dial again to
confirm and exit. Set the other items according to the method above, move the cursor to “Yes” and
Zone Timer Setting
Defaul
MP3
Zone
02
VOL
On
Yes
Pro.
Ring
(Fig. 5-1-5)
TUNER Timer Setting
Yes
01
BAND
FM
No
CH
(Fig. 5-1-4)
