LY International Electronics HS-6818, Руководство пользователя

Страница: 20 / 32

Multi-room Music System
18
This is used for setting the ringer type on timer point, available with four options, i.e. “1, 2, 3 and –“.
“1” refers to note “1 3 5 1”; “2” refers to note “1 5 3 1”, “3” refers to note “1 5 1 5”; and “-“ refers to
no selection of ringer. To set the ringer, rotate the digital wheel to move the cursor to “Ringer”
option and press the digital wheel once, until the icon appears. After that, rotate the digital
wheel to select and then press the digital wheel again to confirm and exit.
6.1.7 Timer Setting for MP3 Track

Rotate the digital wheel to move the cursor to “MP3 Setting” option. Then, press the digital
wheel once to enter MP3 Timer Setting interface (Fig. 6-1-3). Under this interface, you may
select 3 tracks for play on MP3 player at the timer point. “00/00” represents the music to be
played, with the first two numbers indicating the directory of the music and the last two
numbers indicating the serial number of the music in this directory. Setting the directory to
“00” indicates no directory, and setting the music to “00” indicates no selection of music.

Move the cursor to the small pane displaying the number. Then, press the digital wheel
once until the icon appears behind the number pane. Rotate the digital wheel to select
between "Not Cycle”, “Cycle” and “Sequential”. This setting is used for controlling the play
sequence of 3 tracks selected.

After completing the above operations, press “Confirm” to confirm the setting and exit the
MP3 timer setting interface.
The MP3 program set for each timer point is valid for corresponding timer point only. Upon
arrival of the next timer point, the system will execute the setting of the next timer point,
which will override the MP3 setting at current timer point. If there is no setting to MP3 at
the next timer point, the MP3 will not activate upon arrival of next timer point.
6.1.8 TUNER Timer Setting
Rotate the digital wheel to move the cursor to “TUNER Setting" option, and press the digital wheel
once to enter TUNER timer setting interface (Fig. 6-1-4). Under this interface, you may select the
TUNER band and frequency.
 Move the cursor to the pane behind the “Band” option. Then, press the digital wheel once,
until the icon appears. After that, rotate the digital wheel to select. Then, press the
digital wheel to confirm the selection and exit. Select the “Frequency" option according to
the method above.
Note: The “…” appearing during band selection indicates that this setting is
(Fig. 6-1) (Fig. 6-1-1)
MON.
:
ID
001
POWER
ON
NEW
MP3 SET
TIME
08
10 00
:
CHIME
--
TUNER SET ZONE SET
DEL DEL A DAY
RET
(Fig. 6-1-2) (Fig. 6-1-3)
MP3 TIMER SET
SELECT THE DIR AND NUMBER:
LOOP
OK
1 \
12 05
2 \
06 00
3
\
00 07
LOOP
OPTION
TIMER SET IR SETUP ADJ TIME
COPY TIMER EXIT SYSTEM SET
MON.
:
ID
POWER
NEW
MP3 SET
TIME
:
CHIME
TUNER SET ZONE SET
DEL DEL A DAY
RET