LY International Electronics HS-6818, Руководство пользователя

Страница: 17 / 32

Multi-room Music System
15
4
．
Instructions for Manual Operation of MP3 Player
Press “MP3” key on the panel to enter the MP3 player setting interface (Fig. 4-1) (Next page).
4.1 Mode Selection
This operation is used for selecting the play mode of MP3. Three modes are available for selection,
i.e. “Play All”, “Play One” and “Repeat One”. The "Play All” mode refers to sequential play of all the
music files stored in the memory. The “Play One" mode refers to play of the currently selected
music only. The “Repeat One” mode refers to repeated pay of the currently selected music.
How to Set: Rotate the digital wheel to the pane behind the “Mode” option and press the digital
wheel until the icon appear behind the pane. Rotate the digital wheel to select. After selection,
press the digital wheel again to confirm and exit.
4.2 Time Display
As shown in Fig. 4-1 (next page), the time “00:00” in front indicates the time progress of the music
being played, and the time “00:00” behind indicates the total time length of the music being played.
4.3 Music Selection
As shown in Fig. 4-1, move the cursor to the pane “ \ “. Press and rotate the digital wheel
to select. The number in the front pane represents the directory. Selecting 03 indicates that you
have selected the third director in USB disk. The number in the rear pane represents the serial
number of the music in this directory. The name of the selected music is displayed behind the pane.
When selecting the music, please watch the notes on the lower of the screen. If the screen
displays “No USB disk. Please insert USB Disk", this indicates that there is no USB disk inserted
into USB port, or you have inserted an USB disk that cannot be recognized by the equipment. If
you have inserted an USB disk and the equipment has accessed it, the note “USB disk inserted.
Please wait…” will appear on the lower of the screen. If there is no music under a directory in USB
disk, the note “No music found under this directory. Please select another directory" will appear if
this directory is selected. After that, the equipment automatically turn to another directory and
display the names of the music on that directory.
For manual control of MP3 player, you may use the “
“ and “ “ key on the equipment panel
to select the music, and use the “ “ key to control the play and pause. You may also control by
using the wired remote controller and infrared remote controller. For detailed operating methods,
please refer to the introduction of key functions in the Operating Instructions.
5
．
Instructions for Manual Operation of Tuner
Press the “TUNER” key on the panel to enter the tuner control interface (Fig. 5-1). From this
interface, you can control the tuner band, radio frequency and channel. In zone 1, the tuner
（图
4-1
） （图
5-1
）
BAND FM
100.45
MHz
SIGN
STEREO
AM/FM PLAYER
CH 40
LOOP
MP3 PLAYER
03
\
0 1
star
PLAY ALL
00
：
58 04
：
27