Multi-room Music System
17
frequency directly. For the operating methods, please refer to the key functions of remote
controller.
6
．
Timer Programming
Press the TUNER key on the panel to enter the operation option interface (Fig. 6-1) (next page).
From this interface, you may set five functions, i.e. timer setting, time calibration, infrared learning,
time copy and system setting.
6.1 Timer Setting
From “Operation Option” interface, rotate the digital wheel to move the cursor to “Timer Setting”
option, and press the digital wheel once to enter the timer setting interface (Fig. 6-1-1) (next page).
Then, rotate the digital wheel to carry out different settings for the timer point.
6.1.1 Week Setting:
Rotate the digital wheel to move the cursor to “Week” option and press the digital wheel. When the
icon
appears, rotate the digital wheel to load the week to be selected (e.g. Wednesday). Then,
press the digital wheel to confirm and exit.
6.1.2 Add Timer Point:
Adjust the date of Week option to display of a specific day (e.g. Monday). In this case, the other
options on the interface will display all the information of the first timer point on that day. If there is
no display for other options on the interface (Fig. 6-1-2) (next page), it indicates there is no timer
point on that day. To add a timer point, firstly press “Add” option and then set the other options. If
there is a timer point on this day, it is needed to add a new timer point. In this case, please firstly
press “Add” option and then program the other information for this timer point. The serial number
of the added timer point will be always sorted at the end of all timer points on that day. But the
execution of the timer point will be automatically in accordance with the time sequence.
6.1.3 Serial Number Setting:
Rotate the digital wheel to move the cursor to the number pane behind the "Serial Number” option
and then press the digital wheel once, so that the icon
will appear behind the pane. Then,
rotate the digital wheel to load the number to be selected. After that, press the digital wheel once to
confirm and exit.
6.1.4 Power Setting:
This operation is used for timer control over the power output socket on the rear panel of the
equipment (Item 8 on Page 4). The socket provides AC220V output for other equipment. Setting
the power to “ON” indicates that the output socket will have power output upon arrival of timer
point. Setting to “OFF” indicates that the output socket will have no power output upon arrival of
timer point. Setting to “…” indicates default, that is, keep the last setting. The operating method is
same as that for serial number.
6.1.5 Time Setting:
This is used for setting the start time of timer point. The time may be accurate to second based on
24-hour system. The method for time setting is same as that for serial number.
6.1.6 Ringer Setting:
Содержание HS-6818
Страница 32: ...http www lyintlcorp com ...
