Rev #5
Version 1.01
July
2020
Page
23
of
34
4.11.5.3
Flarm
On this page, (we) one can see information about the Flarm device, and do some
configuration of the flight recorder, Flarm and aircraft.
Those settings will work only if TrafficView is the only device communicating with
the Flarm. If other devices are connected (Oudie
for example
), there will be a
conflict between transmit lines of RS232 from
the Oudie and the FlarmView, and
communication will not work.
4.11.5.3.1
Flarm config
In this menu, (are) one will find all range setups for Flarm and ADSB receiver.
4.11.5.3.2
Aircraft config
In the Aircraft config menu, the user can change the type of aircraft and ICAO address.
4.11.5.3.3
Flight recorder
If the Flarm has a flight recorder, TrafficView can send to Flarm all information about pilot
and aircraft. This data will be included in the header of an IGC file from Flarm.
4.11.5.3.4
PF IGC readout
Pressing to this menu, TrafficView will send a command to PowerFlarm, to copy the IGC file
to a USB stick that is plugged in PowerFlarm.
This function works only when PowerFlarm is connected.
4.11.5.3.5
PF pilot event
Pressing to this menu, TrafficView will send command to the Flarm with a pilot event
message, which will be recorder in the IGC file
This function works only with a Flarm connected, and with an IGC option.
4.11.5.3.6
FLARM info
All available information about a connected Flarm unit.
4.11.5.3.7
FLARM licenses
In this page user can see all options that are active or available for connected Flarm device.
Value
Description
AUD
Audio output connection
AZN
Alert Zone Generator
BARO
Barometric sensor
BAT
Battery compartment or built in batteries
DP2
Second Data Port
ENL
Engine noise level sensor
IGC
Device can be IGC approved
