Rev #37
Version 8.0
April 2021
Page 60 of 121
The S8x will only detect turning if a GPS or FLARM device is attached. The S8x
uses a combination of change of speed, angle of bank and direction change to
indicate circling.
The S10x has an internal GPS module.
5.7.8.6.3
Use Active Navigation Data
If this item is checked, all the data relating to navigation will be calculated to either Wpt or
Task, depending on which page the thermal mode was switched from.
5.7.8.6.4
For Manual Switching
If you manually switch to thermal mode, all navigation data will be related to the setting you
have selected here (
waypoint or task data
)
5.7.8.6.5
Thermal Assistant Ping Method
If the Thermal assistant ping method is enabled the user will hear a PING during circling.
When the PING is heard the pilot must expand the circle to centre the thermal. In the
settings there are two methods available to trigger the PING: time before thermal maximum
and angle before thermal maximum.
5.7.8.6.6
Time before Ping
Using this method, the user will hear a PING (different audible signal) the selected number
of seconds before maximum of thermal.
5.7.8.6.7
Angle before Ping
Using this method, the user will hear a PING (different audible signal) the selected number
of degrees before maximum of thermal.
5.7.8.7
Task
With this dialogue you can change the colour of the task line and turn point zone and modify
the zone transparency and Zone line width.
5.7.8.7.1
Show Only Current Zone
It shows only the current active zone on the task.
Содержание S10 Series
Страница 2: ......
Страница 103: ...Rev 37 Version 8 0 April 2021 Page 103 of 121 ...
Страница 121: ...Rev 37 Version 8 0 April 2021 Page 121 of 121 ...
