LXNAV S10 Series, Руководство пользователя

Страница: 29 / 121

Rev #37
Version 8.0 April 2021
Page 29 of 121
5.1.4 Select / Select Near (Only in WPT mode)
To select a waypoint, rotate the lower rotary knob to highlight the select option and then
press once. This will open the Waypoint list.
A waypoint can be selected from the alphabetical list of waypoints (see uploading files in
Chapter 5.7.5.1). Rotating the lower rotary knob moves you through the waypoint list in
alphabetical order, clockwise increases the value, counter-clockwise decreases the value. To
select the first letter of the desired waypoint, rotate the lower rotary knob, then press the
lower push button to move to the next selection of the letter. Rotate the lower rotary knob
until the second letter of the required waypoint is highlighted and then repeat the process
until the required waypoint is the only selection available. Press enter (lower rotary button)
to select the waypoint. The screen will then change back to the navigation mode and show
a line to the waypoint, waypoint name and the relative bearing.
Select
Near to select a WPT from the list which is sorted by distance from the current
location. You can sort waypoints by Name/Distance and Bearing by pushing the upper or
lower push button. Selection of a WPT is as described above.
5.1.5 WPT Elevation
WPT elevation can be modified in this menu (can be raised or lowered).
Changing elevation will have consequences on most of the navboxes, so please pay attention
before changing its parameters!
5.1.6 Edit Target
The user can edit the FLARM target details.
5.1.7 FLARM Traffic
This mode shows all available FLARM traffic around the glider with their FLARM ID codes;
the user can also edit all FLARM object data.
5.1.8 Event
Event is used to log an event. The recording rate will be increased to 1 second for one
minute. A message “Event marked” will be displayed on the screen.
5.1.9 Night
Selecting night will cause the unit’s brightness to be decreased to its minimum. Pressing
again on "night" will reset the brightness to the value defined under
settings.