LXNAV S10 Series страница 8 Скачать руководство пользователя | Manualshive

Страница: 8 / 121

background image

Rev #37

Version 8.0

April 2021

Page 8 of 121

1

Important Notices

The LXNAV S8x/S10x system is designed for  VFR use only as an aid to prudent navigation.
All  information  is  presented  for  reference  only.    Terrain,  airports  and  airspace  data  are
provided only as an aid to situation awareness.

Information in this document is subject to change without notice.  LXNAV reserves the right
to  change  or  improve  their  products  and  to  make  changes  in  the  content  of  this  material
without obligation to notify any person or organization of such changes or improvements.

A Yellow triangle is shown for parts of the manual which should be read carefully
and are important for operating the LXNAV S8x/S10xsystem.

Notes with a red triangle describe procedures that are critical and may result in
loss of data or any other critical situation.

A bulb icon is shown when a useful hint is provided to the reader.

A cloud icon is shown when this functionality is supported only on S10x-systems.

1.1

Limited Warranty

This LXNAV S8x/S10x product is warranted to be free from defects in materials or
workmanship for two years from the date of purchase. Within this period, LXNAV will,

at its

sole discretion

, repair or replace any components that fail in normal use. Such repairs or

replacement will be made at no charge to the customer for parts and labour, the customer
shall be responsible for any transportation cost.  This warranty does not cover failures due to
abuse, misuse, accident, or unauthorized alterations or repairs.

THE WARRANTIES  AND REMEDIES CONTAINED HEREIN  ARE EXCLUSIVE  AND  IN LIEU OF
ALL  OTHER  WARRANTIES  EXPRESSED  OR  IMPLIED  OR  STATUTORY,  INCLUDING  ANY
LIABILITY  ARISING  UNDER  ANY  WARRANTY  OF  MERCHANTABILITY  OR  FITNESS  FOR  A
PARTICULAR  PURPOSE,  STATUTORY  OR  OTHERWISE.    THIS  WARRANTY  GIVES  YOU
SPECIFIC LEGAL RIGHTS, WHICH MAY VARY FROM STATE TO STATE.

IN  NO  EVENT  SHALL  LXNAV  BE  LIABLE  FOR  ANY  INCIDENTAL,  SPECIAL,  INDIRECT  OR
CONSEQUENTIAL  DAMAGES,  WHETHER  RESULTING  FROM  THE  USE,  MISUSE,  OR
INABILITY TO USE THIS PRODUCT OR FROM DEFECTS IN THE PRODUCT.  Some states do
not allow the exclusion of incidental or consequential damages, so the above limitations may
not apply to you.  LXNAV retains the exclusive right to repair or replace the unit or software,
or to offer a full refund of the purchase price, at its sole discretion.  SUCH REMEDY SHALL
BE YOUR SOLE AND EXCLUSIVE REMEDY FOR ANY BREACH OF WARRANTY.

To obtain warranty service, contact your local LXNAV dealer or contact LXNAV directly.

April 2021

© 2021 LXNAV. All rights reserved.

«
...
6
7
8
9
10
...
»

Содержание S10 Series


























































































































Отзывы:

Нет отзывов

Похожие инструкции для S10 Series

Бренд: Rain Bird Страницы: 8

Бренд: Magellan Страницы: 40

Бренд: Magellan Страницы: 107

Бренд: Jensen Страницы: 16

RoadMate 6000T - Automotive GPS Receiver

Бренд: Magellan Страницы: 119

RoadMate 6000T - Automotive GPS Receiver

Бренд: Magellan Страницы: 121

Magellan eXplorist 300

Бренд: Magellan Страницы: 90

MOBITRONIC RV-550/SWM

Бренд: Waeco Страницы: 44

Бренд: Nextar Страницы: 1

CENTRAL Omega HEC-12 PRO Prohibitor

Бренд: Tyco Fire Product Страницы: 4

Бренд: A-rival Страницы: 25

Бренд: Legacy Страницы: 25

Бренд: Xomax Страницы: 19

Бренд: Boss Audio Systems Страницы: 4

Бренд: Phonocar Страницы: 56

Бренд: Honda Страницы: 2

Opto-Matic 30078

Бренд: Trico Страницы: 2

Бренд: ADAM OPEL Страницы: 213

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды