Installation and Configuration
Version 1.02, January 2019
Page 20 of 25
6.2.2.3.3
Transponder Bridge (UPDATED)
The Transponder Bridge is the same part of hardware as the NMEA Bridge. On the main
unit it can be configured as a Transponder Bridge which can communicate with the
supported Transponders (for more information please refer to the Radio/Transponder Bridge
manual).
6.2.2.3.4
CAN2CAN – Rotax 912IS
The CAN2CAN bridge is used whenever device with different CAN speed/protocol wants to
be connected to LX CAN BUS (eCopilot). Female SUB D9 connector on CAN2CAN adapter is
used for LX CAN and male SUB D9 for Rotax 912IS engine. Pinout is same on both sides,
but power is required only on LX side via appropriate CAN2CAN M12 cable.
Connector pinout for
LX CAN BUS SUBD9
Pin
Description
1
-
2
CAN-L
3
GND
4
-
5
-
6
-
7
CAN-H
8
-
9
PWR
6.2.2.4
Wi-Fi Module
The Wi-Fi dongle must be plugged into a USB port. The Wi-Fi dongle will be operational
when the unit which will have enabled that option and the wireless network are available.
Connector pinout for
Rotax 912IS CAN BUS
Pin
Description
1
-
2
CAN-L
3
GND
4
-
5
-
6
-
7
CAN-H
8
-
9
-
