LXE VX4 Скачать руководство пользователя страница 44 | Manualshive

Страница: 44 / 86

LXE VX4 Скачать руководство пользователя страница 44

36

Connect USB Devices

VX4 User’s Guide

E-EQ-VX4OGWW-H-ARC

Connect USB Devices

The VX4 provides a USB port via an adapter cable attached to the connector marked “USB” .

Figure 31 Connect USB Adapter Cable

1.

Insert the watertight-connector end of the USB adapter cable into the VX4 USB
connector, aligning the groove on top of the cable with the notch at the top of the
VX4 connector.

2.

Once the pins are firmly seated, tighten (turning clockwise) the connector into
place.

Figure 32 Connect USB Device to Adapter Cable

3.

Plug the desired device, such as a USB mouse or floppy drive, into the end of the
adapter cable with the USB port. Refer to the documentation for your USB
device for more details on installation. USB devices may be installed, removed
or swapped without turning off the VX4.

Note:

The USB Host Controller (or USB Port) must be enabled in the BIOS.
Also, to use a USB floppy drive, USB BIOS Legacy Support must be
enabled. For more information on these BIOS settings, please refer to
Chapter 4, “System Configuration” in the VX4 Reference Guide.

«
...
42
43
44
45
46
...
»

Содержание VX4























































































Отзывы:

Нет отзывов