LXE VX4 Скачать руководство пользователя страница 34

Страница: 34 / 86

Install Mounting Brackets

VX4 User’s Guide

E-EQ-VX4OGWW-H-ARC

VMT Remote Keyboard Bracket Assembly

1. Keyboard

Cable

2. VMT

Keyboard

3. Bracket

4. Mounting

Surface

Figure 20 VMT Remote Keyboard Bracket Assembly

Equipment Needed

: Phillips screwdriver, torque wrench.

Place the keyboard face down on a flat, stable surface.

Position the bracket on the keyboard base, aligning the four screw holes in the
keyboard with the four mounting holes in the bracket flanges. When positioned
correctly, the bracket should overlap at the top of the keyboard.

Attach the keyboard to the bracket with four screws (included). Tighten to 9 +/-
1 in/lb (1.02 N/m).

Attach the keyboard-bracket assembly to the vehicle’s mounting surface using
four 1/4 bolts or equivalent.

Note:

Bolts, washers, and wrench needed when attaching the bracket to the vehicle are not
supplied by LXE.

IMPORTANT:

Mount to the most rigid surface available.

Содержание VX4























































































Результаты поиска

Содержание VX4

Отзывы:

LXE VX4, Руководство пользователя, Страница: 34 / 86

Результаты поиска

Содержание VX4

Отзывы: