LXE MX3 страница 18 Скачать руководство пользователя | Manualshive

Страница: 18 / 64

background image

12

Insert Main Battery

MX3-RFID User’s Guide

E-EQ-MX3RFIDOGWW-A

Insert Main Battery

Press the Power button after the battery is inserted into the battery compartment.

Note:

New batteries must be charged prior to first use

. This process takes up to four hours in

an MX3 Multi-Charger Plus and eight hours with an external power source connected to
the power jack on the endcap of the mobile device.

Figure 13 Battery Contacts in Battery Compartment

The Main Battery compartment is located at the bottom of the back of the computer. The arrow in
the figure titled “Battery Contacts in Battery Compartment” points to the battery contacts in the
battery well. The figure titled “Main Battery” shows the charger contacts on the back of the main
battery.

Figure 14 Main Battery

Place the battery in the compartment, making sure the side of the battery with six contacts matches
up with the battery contacts in the battery well. Do not slide the battery sideways into the battery
well.

Firmly press the battery into the battery well until the Retaining Clip on the battery clicks. The
battery is now securely fastened to the mobile device. The MX3-RFID draws power from the
battery immediately upon successful connection.

Note:

Do not cover the vent aperture in the battery well (located in the left side of the battery
well) with anything other than the main battery.

Check Battery Status

Tap the

Start | Settings | Control Panel | Power

icon. Main and backup battery level, status and

Power Scheme timeout setting options are displayed.

About Lithium-Ion Batteries

Li-Ion batteries (like all batteries) gradually lose their capacity over time (in a linear fashion) and
never just stop working. This is important to remember – this mobile device is always ‘on’ even
when in the Suspend state and draws battery power at all times. Use the

Start | Settings | Control

Panel | Power | Battery

tab to check the battery status and power reading.

«
...
16
17
18
19
20
...
»

Содержание MX3

































































Отзывы:

Нет отзывов

Похожие инструкции для MX3

Бренд: Cambium Networks Страницы: 3

Бренд: Maxview Страницы: 4

Бренд: Clare Controls Страницы: 3

Бренд: AR Страницы: 24

Бренд: Channel Master Страницы: 1

FireCell FC-868-A03

Бренд: EMS Страницы: 2

Бренд: NARDA Страницы: 26

Бренд: PNI Страницы: 10

Бренд: Oricom Страницы: 2

Бренд: Light Beam Antenna Страницы: 26

Бренд: RFS Страницы: 11

Бренд: Leica Страницы: 38

Бренд: Ubiquiti Страницы: 24

Бренд: REX Страницы: 2

Бренд: 1byone Страницы: 2

Бренд: 1byone Страницы: 2

Бренд: qpcom Страницы: 3

Бренд: Gotting Страницы: 30

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды