Select the location in which you want the software installed. Click “Install.”
3
4
Next, click “Install Application.” Follow the prompts in the Setup Wizard.
Not required, but for easy image organization, create a new folder named “BioVID Images” on your desktop next
to your ToupView icon. As images are saved, they will be easy to find in the image folder on the desktop. Other-
wise, images can be saved into any folder or client file on the computer or network.
Select “Toupview” icon.
Connect the camera to the computer using the included USB cable. Your computer should bring up a window
which reads, “Device driver software installed successfully.”
The software is now loaded, and the camera is ready to use.
Operation - USB Output
The Software should automatically install a short cut on either your desktop or on the start menu. If it does not, look
under “All Programs” in the START Menu, and find the LW Scientific folder. Open the software from there, or right
click on the icon, and send a shortcut to the desktop for easy access.
6
7
8
9
5
When installation is completed, the following window will appear. Click “Finish.”
1
Install your camera per the instructions in Setting Up Your Camera Section:
Start the ToupView software.