P. 770.270.1394
F. 770.270.2389
865 Marathon Parkway Lawrenceville GA 30046
Remove the monitor from its packaging and mount the monitor to the camera’s front mounting bracket using the
included thumbscrew. Do not overtighten the thumbscrew but ensure you securely tighten it to prevent the moni-
tor from falling off of the camera.
Plug the power supply into the camera and monitor.
Note: The BioView Monitor includes a double-ended power cord. You can plug both the monitor and camera
into the two connectors, using only one power adapter for both devices.
If you wish to adjust the viewing angle of the monitor, loosen the thumbscrew on the back of the unit and then
adjust the screen to the desired angle. Note that the hinge point has teeth to allow the angle to be locked firmly
into position. After selecting the desired angle, retighten the thumbscrew to ensure the monitor does not move.
Failure to loosen the thumbscrew while adjusting the viewing angle can break the hinge.
BioVIEW Camera Monitor Instructions:
If you purchased the BioView Monitor for your camera, please follow the below steps to install the unit. If you did
not purchase the BioView Monitor, you can skip this section.
Before installing the monitor to your BioVID camera, install camera on your microscope’s trinocular C mount
threading.