P. 770.270.1394
F. 770.270.2389
865 Marathon Parkway Lawrenceville GA 30046
Setting Up Your Camera
Mounting camera to microscope:
Remove all camera components and set them on a secure, clean surface.
Next, take the camera out of the packaging. If your microscope or stereoscope has a trinocular head, simply
screw the camera onto the C-Mount. If you have a binocular scope, you will need the optional eye tube adapter
(part number MVP-ADAO-ETCM) to allow you to insert the camera into one of the binocular eye tubes....
Insert included SD card straight down into the SD card slot.
For HDMI output:
Once the camera is firmly mounted and secured onto the microscope, plug one end of the included HDMI cable
into the top of the camera and the other into your HD TV.
Connect the USB mouse to the USB port on the top of the camera.
Plug the included power cord into the DC12V port on the top of the camera.* The LED light on the top of the
camera will glow red. Next, press the ON/OFF button once to power on the camera. The LED light will change to
blue. Your camera is ready to use.
*DO NOT LEAVE POWER JACK PLUGGED IN FOR EXTENDED PERIODS OF TIME. Unplug jack when camera is not in use.
For USB output:
Install included software per instructions in the Software Installation section of this manual.
Remove the HDMI Cable and USB mouse and store in a safe place.
Plug one end of the included USB cable into the USB port on the top of the camera and the other into the USB 2
port of your computer.
Plug the included power cord into the DC12V port on the top of the camera.* The LED light on the top of the
camera will glow red. Next, press the ON/OFF button once to power on the camera. The LED light will change to
blue. Your camera is ready to use.
For Simultaneous HDMI and USB output:
Attach the HDMI cable to your HD TV and the USB cable to your computer.