INSTALLATION
1-800-982-4587
www.lvscontrols.com
2/6
CAUTION: MAKE CERTAIN THE AC POWER IS OFF UNTIL THE INSTALLATION IS COMPLETE.
1. SPECIFICATION OF LED-BP-SLIMMODELS
See the table below for the selected model.
2. INSTALLING THE LED-BP-SLIM SERIES UNITS
The unit can be mounted inside or outside (nearby or on top of) the luminaire.
3. INSTALLING THE LED TEST SWITCH (LTS)
Select a convenient location for the LTS so that it can be seen after installation.
Drill a 1/2"(12 mm) hole for mounting the LTS. Connect the wires from LTS to the
LED-BP-SLIM model according to the wiring diagram on page 3.
INSIDE THE LUMINAIRE
LED test switch
LED
-BP
-SL
IM-X
X-T
B
LED-BP-SLIM
MODEL SPECIFICATIONS
MODEL
EMERGENCY
OUTPUT
(
CONSTANT
)
4.5 WATTS
13.5 WATTS
LED-BP-SLIM-4.5W
LED-BP-SLIM-4.5W-TB
VOLTAGE OUTPUT
5-200
VDC
15-300
VDC
LED-BP-SLIM-9W
LED-BP-SLIM-9W-TB
LED-BP-SLIM-13.5W
LED-BP-SLIM-13.5W-TB
LED-BP-SLIM-18W
LED-BP-SLIM-18W-TB
9 WATTS
10-300
VDC
18 WATTS
20-300
VDC
OUTSIDE THE LUMINAIRE
LED test switch
Two 5/8"(15mm) holes with
conduit connector for
LED-BP-SLIM-XX
.
LED
-BP
-SL
IM-X
X
