LVI YALI PARADA, Инструкция по установке и эксплуатации

Страница: 33 / 42

YA
LI P
A
R
A
D
A - Y
A
LI R
A
M
O I
N
ST
A
LL
AT
IO
N A
N
D O
PE
R
AT
IN
G M
A
N
U
A
L
201
8-
02
-01
YA
LI P
A
R
A
D
A - Y
A
LI R
A
M
O I
N
ST
A
LL
AT
IO
N A
N
D O
PE
R
AT
IN
G M
A
N
U
A
L
201
8-
02
-01
GENERAL
HOW TO CHANGE BETWEEN THE OPERATING MODES
• Use the left “

” or right “

” navigation keys to move
the frame cursor on the desired operating mode and
press “
OK ” to confirm your choice.
HOW TO CHANGE COMFORT, REDUCED, OR FROST
PROTECTION SET TEMPERATURES
• By pressing the “ + ” or “ – “ keys, the set temperature
will start to blink and can be adjusted to the desired
temperature level.
• Wait until the new set temperature stops blinking or
press the “ OK ” key to confirm immediately.
NOTE: The comfort temperature setting must always
be higher than the reduced temperature setting. If it is
not possible to lower the comfort temperature to the
desired value, first set the reduced temperature to an even
lower value, or, if it is not possible to increase the reduced
temperature to the desired value (maximum 19 °C), first
increase the comfort temperature.
HOW TO VIEW THE MEASURED ROOM TEMPERATURE
• Press the “ OK ” key twice. On the first press, the screen will
illuminate, and on the second press, the measured room
temperature will be displayed together with the room
temperature icon , in section 5 of the LCD display.
• The display will return automatically to the active
operation mode after 8 seconds.
HEATING
• When the radiator is heating, the , in section 7 of
the LCD display, is constantly displayed. As the radiator
regulates, the may not always be displayed due to the
required heating demand.
STAND ALONE RADIATOR
COMFORT MODE
This mode is to be used during periods of normal
occupancy.
Default value: 19.0°C
REDUCED MODE
This mode is to be used at night-time or when the
house is unoccupied for a few hours or more.
Default value: 15.5°C
AUTOMATIC MODE
This mode is intended to be used in combination with an
external programmer, or the built in programmer. If used
without an external programmer, the radiator will follow
the selected preset or user defined program.
Default value: 19.0°C
33
GB
GENERAL
INFORMATION