LVI YALI PARADA, Инструкция по установке и эксплуатации

Страница: 36 / 42

YA
LI P
A
R
A
D
A - Y
A
LI R
A
M
O I
N
ST
A
LL
AT
IO
N A
N
D O
PE
R
AT
IN
G M
A
N
U
A
L
201
8-
02
-01
• Use the “ + ” and “ - “ keys to adjust the time at which this
Reduced period will end. The segments in the program
information bar will populate to show the Comfort period.
• Press the “ OK ” key to confirm the time at which the mode
will change over from Comfort to Reduced. The symbol
will start to blink instead of the symbol, signifying the
start of this Reduced period.
• If more than two Comfort periods are required, repeat the
previous steps.
• When all Comfort periods have been defined, use the “ + ”
key to advance beyond the time “23:30”. The above screen
will then be shown, asking if the program that has just
been defined for that day is to be copied to the next day.
• To copy the program onto the next day, press the “
OK ” key.
Press the “ OK ” key for any further days the program is to be
copied over to.
• If a different program is to be defined for the next day,
press the “ + ” or “ – ” key until the word “ no ” is displayed.
Press the “ OK ” key to confirm.
• The day number will increment to the next day and the
time will be set back to “00:00”.
• When all of the days have been defined, the word “ SAVE ”
will be displayed. To save the program, press the “ OK ” key
to confirm.
• If the program is not to be saved, so that any previously
user defined program is not overwritten, press the left
“

” arrow key. The screen will revert back to the Program
Selection screen.
RADIATOR CONNECTED TO A CENTRAL
CLOCK BY WIRE, OR WIRELESSLY
CONNECTED TO AN LVI TOUCH E3
• When connected to a wired programmer, the Auto
mode must be selected on the radiator so that it follows
the orders of the programmer.
NOTE: Preset program d1 must be selected
36
GB
GENERAL
INFORMATION