LVI Touch E3, Инструкция по установке и эксплуатации

Страница: 76 / 80

| 76
FOR THE INSTALLER AND FOR
ADVANCED USERS
UK
• If you want to edit device information/settings, press the button with a Red dot
(long Press):
- Device name,
- Power,
- Set front panel max surface temperature level.
> Press ”Heating rate maximum level” rate.
> Select P1, P2 or P3. NOTE: the first paired radiator must have the same
or higher value than the rest of the radiators in the room, otherwise the energy
calculation will be wrong.
> Press ”Green check”button to confirm.
- For double radiator, change to sequential control.
> Press ”Sequential control”button
> Select ”No”(default setting) if the radiator’s front and back panel should be
evenly heated.
> Select ”Yes”if the radiator’s front and back panel should be heated sequentially.
> Press ”Green check”button to confirm.
08. Screen lock
• Press ”Screen lock” button
• Enter your personalized code (it must contain 4 characters)
• Press ”Green check” button to confirm
Note: the default code is 1066
09. Heating settings
Set Minimum and Maximum allowed temperatures in each room.
• Press ”Heating Settings” button
• Press a room button
10. WiFi settings (See ”WiFi settings” section, p 19)
11. General factory default (all updates and user data will be erased except WiFi-
settings. They are reset under WiFi settings (See ”WiFi settings” section, p 19)
by pressing the the Red "Reset" button (long press)
• Press ”Green check”button to confirm
• Press ”Red cross”to decline
12. Update firmware
• Insert SD card with new firmware
• Press ”Update firmware”
• Press ”Green check”button to confirm
• Press ”Red cross”to decline