LVI Touch E3, Инструкция по установке и эксплуатации

Страница: 75 / 80

75 |
FOR THE INSTALLER AND FOR
ADVANCED USERS
UK
FOR THE INSTALLER AND FOR
ADVANCED USERS
OTHER FUNCTIONS FOR THE INSTALLER
01. Press ”Main menu”button
A
02. Press the ”Parameter setting”button
I
(long press)
03. Create house (See ”Create house”section, p 6)
04. Radio pairing (See ”pairing radiators”section, p 6)
05. To delete a device
• Press ”Delete a device”button
• Press ”heating”button
• Use the arrows to scroll through the list of paired devices.
• Select the device to be deleted
- Note: To make sure that the right device is deleted, identify it first (See below)
- Note: If the first device in a room is deleted, all devices in that room
will be deleted.
• Press ”Green check”button to confirm
06. To delete all devices
• Press ”Delete all devices”button
• Press ”Green check”button to confirm
• Press ”Red cross”to decline
07. Identify a device and edit some device information; such as name, power,
surface temperature limitations and sequential mode.
• Press ”Identify a device”button
• Press the ”Radio button”
• Make the device send a radio message
- (On Yali, press OK and wait for the backlight to go off)
• Make a note of the ID-number that is displayed on 3rd line of the screen >>
• To be sure it is right, send a second radio message from the device and compare
the ID-number (it could happen that another device coincidently sends a
message at the same time, therefor it is good to repeat this operation).