LVC Magna 100 Скачать руководство пользователя страница 10

Страница: 10 / 32

MACHINE PREPARATION

CONNECTION OF THE BATTERY CHARGER

The connector is placed in the left lower part of the operator seat. The

upper part (1), which is connected to the batteries, is the one which has to
be inserted to the connector (2) fixed to the cables of the battery charger.

The coupling connector of the battery charger is delivered in the bag
(together with this instruction booklet ) and must be assembled on the

battery charger cables following the provided instructions (see
instructions booklet for the battery charger).

RECHARGING THE BATTERIES

Figure 8
To ensure no permanent damage to the battery it is essential to avoid

complete discharge by arranging to recharge as soon as the blinking
signal indicating the discharged batteries switches on.

NOTE:

Never leave the batteries completely discharged, even if the

machine is not being used.

When recharging the batteries, keep the base support of the seat

lifted

. Every 20 recharging operations, check the level of the electrolyte

and, if necessary, top up with distilled water.

BATTERY CHARGE LEVEL INDICATOR

Figure 9

The digital battery signal has 4 fixed positions and a blinking one. The
numbers which appear in the display show the approximate charge level.

4 = maximum charge, 3 = ¾ charge, 2 = ½ charge, 1 = ¼ charge,
0 = discharged batteries (blinking)

ATTENTION

: A few seconds after the appearance of the blinking “0” the

brush motor automatically switches off. With the rest of the charge it is

possible to finish any drying operation before starting the recharge.

Содержание Magna 100

































Результаты поиска

Содержание Magna 100

Отзывы:

Похожие инструкции для Magna 100

Бренды по названию

Популярные бренды

LVC Magna 100, Использование и обслуживание

Результаты поиска

Содержание Magna 100

Отзывы:

Похожие инструкции для Magna 100

Бренды по названию

Популярные бренды