110
XMS-1024P
a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450
LUX-UG-XMS-1024P Vers: 081314
Port Protect
TC Protect:
Prevents decreases in performance and stability of the Switch brought on
by continuous removal of MAC Address entries upon receipt of TC-BPDUs
in the STP Network.
BPDU Protect:
Prevents the edge Port from being attacked by malicious BPDUs.
BPDU Filter:
Prevents malicious BPDU fl oods in the STP Network.
LAG:
Displays the LAG Group number the Port belongs to.
CAUTION:
Port Protect settings will be restored to defaults if the
Switch is restarted and you have not selected Save Confi g
from the main menu and saved your running confi guration to
non-volatile memory.
7.4.2 TC Protect
When TC Protect is enabled for the Port on
Port Protect
page, the TC threshold and TC
protect cycle need to be confi gured on this page.
Choose the menu
Spanning Tree>>STP Security>>TC Protect
to load the
following page.
Figure 7-11 TC Protect
The following entries are displayed on this screen:
TC Protect
TC Threshold:
Enter a number from 1-100. This is the maximum number of the
TC-BPDU packets received by the Switch in a TC Protect Cycle. The
default value is 20 packets.
TC Protect Cycle:
Enter a value from 1-10 seconds to specify the TC Protect Cycle. The
default value is 5 seconds.
