MOTION MOTORIZATION
7
6
!
Up
Channel
indicator
Channel
selection
Pair
button
Down
Pair a controller
Check rotational direction
i
End limits must be programmed to use a shade properly and to prevent it from being damaged.
Proceed to step 12 if end limits are already set.
i
i
6.1
6.2
6.3
7.1
7.2
Pair a controller control that is able to program shades. See pages 4 and 5 for
controller control details. In this manual, 5 Channel Controller is displayed.
Shortly press the program button on
the motor. The shade will start stepping,
indicating that program mode has been
activated.
(The shade keeps stepping until the
program mode is deactivated.)
Select a desired channel for the shade
using the channel selection button on the
controller.
Repeat steps 6.1 - 6.3 to remove a shade
from a channel.
Shortly press the down button to
check if the shade unrolls the right
way. If the shade moves up, the
rotational direction must be changed.
Simultaneously press the
up
and
down
button to change the rotational
direction.
Press the pair button on the back of
the controller to pair the shade with
the selected channel. The shade will
shortly stop stepping, indicating that the
controller has been paired to the shade.
800.817.1204 1221 Admiral Street Richmond, VA 23220 LuXoutShades.com
8
