Motor is in transport mode.
Activate the motor. See step 25.
Charge the motor. See step 19.
Replace the battery in the controller.
See the manual of the controller.
Replace the battery in the controller.
See the manual of the controller.
Make sure that the antenna of the motor
is out of the way of metal objects.
Move closer to the motor.
Pair the controller with the motor.
See step 6.
Try a different charger or make sure the
charger is plugged in the outlet.
Pair the shade with a free channel to
program or use single select to program
the shade.
1) Program end limits. See step 8 - 11.
2) Activate direct control. See step 17.
Charge the motor. See step 19.
Motor battery is empty.
Controller battery is empty. (LEDS
of controller are flashing rapidly.)
Controller battery is
inserted incorrectly.
The distance from the controller to
the motor is too far.
The controller is not connected to
the shade.
Motor LED flashes red.
Shade does not work.
Shade is not charging.
Multiple shades respond
to a controller. (Unable to
program a single shade)
Shade moves in
small steps.
Favorite position can not
be programmed.
Shade lowers too far.
Shade moves in the
opposite direction.
Shade moves in the
opposite direction.
Charger is not plugged in or does
not work.
Multiple shades are paired with a
single channel.
1) No end limits are programmed.
2) Direct control is deactivated.
No end limits are programmed.
Program end limits. See step 8 - 11.
Reprogram end limits. See step 8 - 11.
Change the rotational direction.
See step 7.
Press the program button on the motor
to exit program mode.
End limits are programmed incorrectly.
The rotational direction has been
set incorrectly.
The shade is in program mode.
Radio-frequency interference
The battery of the motor is empty.
MOTION MOTORIZATION
Activate/Deactivate the motor
25
i
To prevent the shade from getting damaged, the motor has a transport mode that makes sure the shade
will not be activated before installation.
Hold the
program
button and pull twice to activate or deactivate the motor. The motor can also be
activated by charging it with a micro USB cable.
25.1
Frequently Asked Questions
MOTION® is a registered trademark of Coulisse B.R.
800.817.1204 1221 Admiral Street Richmond, VA 23220 LuXoutShades.com
18
