MOTION MOTORIZATION
It is possible to only delete end limits or to do a factory reset.
Factory reset will delete the end limits and remove the connection to any paired controller.
i
18
Reset the shade
18.1
Press the program button on the motor to activate program mode.
Delete end limits
: to delete the end limits of the shade, hold the
program
button until the
shade stops stepping for the first time, and keep holding button until the shade stops stepping
for the second time (approximately 10 seconds).
Factory reset
: to reset the shade to factory defaults, hold the button for at least 20 seconds.
The shade will stop stepping twice. After the second stop, the shade will give one extra step to
confirm factory reset.
i
i
19
Recharge the battery
LED light flashes
red during operation;
Charge the battery
LED light flashes
green;
Battery is charging
LED light constantly
green;
Battery is fully charged
Use a micro USB cable
to charge the motor
800.817.1204 1221 Admiral Street Richmond, VA 23220 LuXoutShades.com
14
