Luxman M-900u, Руководство пользователя

Страница: 6 / 20

4
Names and Functions
1 . Standby indicator (STAND BY)
Indicates that this unit is in the standby state.
This indicator lights when the operation switch is turned off
after the main power switch on the rear panel is turned on.
When the operation switch is turned on and when the main
power switch is turned off, this indicator turns off.
2. Operation indicator (OPERATION)
Blinks (for approx. 15 sec.) in the time muting mode when
the operation switch is turned on and lights up when the
operation state is activated afterward.
3. Operation switch (OPERATION)
Turns this unit from the standby state to operation state.
When the main power switch on the rear panel is turned on
to set this unit to the standby state and this switch is turned
on, this unit is set to the operation state.
When wiring or connection is performed, be sure to turn off
this switch.
4. Input indicator (LINE/BAL LINE)
Indicates the input selected with the input switch.
5. Input switch (INPUT)
Selects the unbalanced input terminal (LINE) or balanced
input terminal (BAL LINE), both of which are located on the
rear panel.
Every time this switch is pressed, the selection changes as
follows: LINE
→
BAL LINE
→
LINE
→
BAL LINE
→
LINE…
Factory default: LINE
When this switch is toggled, the input/output muting circuit
is activated and no sound is generated during the time.
LINE BAL LINE
LINE BAL LINE
6 7 5 3 4 2 1 8
Front panel