Luxman M-900u, Руководство пользователя

Страница: 10 / 20

8
Connections
Before Connecting
Before connecting other devices, connect the jack side of the
accessory power cable to the AC inlet of this unit.
Before connection, turn off the main power switch of this
unit and the power of all other connected devices to prevent
unexpected accidents that may be caused by noise.
How to connect power supply
Use the accessory power cable and insert the AC plug in an
outlet on the wall in the room where the unit will be installed.
How to connect the input terminals to
input devices such as a control amplifier
Connect between the output terminals of an input device
such as a control amplifier and the input terminals of this unit
with pin-plug cables or balanced cables.
At this connection, exercise extra care not to conduct wrong
connection between right and left channels. If the right and
left channels are connected reversely, the localization of
sound images is deteriorated, thus failing in normal stereo
playback.
If pin-plug cables are used, inadequate connection of the
grounding of the cables may generate noises including hum,
resulting in an adverse S/N ratio. Surely insert the connection
plug.
How to connect the remote input terminal
to a control amplifier
Connect between the remote output terminal of a control am-
plifier such as Luxman C-900u and the remote input terminal
of this unit with the dedicated remote cable supplied with this
unit.
After this connection, this unit can be turned to the operating
state in conjunction with the operation switch of the control
amplifier.
Use the dedicated remote cable only for the connection be-
tween this unit and Luxman control amplifiers.